Slideshowbox Forum

Disabling thumbnails in pan and zoom slideshow.

user1216241 — Thu, 17 May 2012 16:42:52 -0500

like the title says, i couldn't get this to happen. I tried setting the size to 0/0, removing source.xml info about it.

is this possible ?

Re: French labels

user1041876 — Wed, 09 May 2012 08:46:28 -0500

Hello,
Yes !!

Sincerely,
Cyrille

Re: French labels

alexpopovici — Wed, 09 May 2012 08:42:17 -0500

Hello,
You can change the control labels (Next button) by editing the parameters from your html file (for example the sample.html file that comes out with the ThumbNailSlide template).

Sincerely,
Alex

Re: French labels

user1041876 — Sat, 05 May 2012 09:11:25 -0500

Hello, i use ThumbnailSlide.

Regards,
Cyrille

Re: French labels

alexpopovici — Fri, 04 May 2012 08:35:24 -0500

Hello,
Could you please tell me what template are you using?

Regards,
Alex

Re: Multi lines for description

alexpopovici — Fri, 04 May 2012 08:30:05 -0500

Hello,
Could you tell me please what template are you using? It would be helpful for me if you could send me a link to your slideshow so that I can take a closer look. Also you can use multi lines in the description text just for some templates, you have to edit only the source.xml file. Below is a list with the templates that are supporting or not multi lines in the description:

Cube3dHorizontal - No
Cube3dVertical - No
FrameSlide - Yes
GridScale - Yes
HorizontalFlip - No
ModernSlide - Yes
PanAndZoom - Yes
PolaroidDefault - Yes
PolaroidPaper - Yes
PolaroidVectorial - Yes
SimpleFade - No
SimpleFadeThumbview - Yes
SimpleGrid - Yes
SimpleScale - No
SimpleSlide - No
SimpleThumbview - Yes
StackAlbum - Yes
ThumbnailScroll - Yes
ThumbnailSlide - No
ThumbnailWall - Yes
TwoStepFade - No
TwoStepPixelate - No
VerticalFlip - No
Wall3D - Yes

Regards,
Alex

French labels

user1041876 — Fri, 04 May 2012 04:53:58 -0500

Hello, where can i find the complete description of SSB2 all parameters ? I want to change the label of Next button,.....
Thanks

Multi lines for description

user1216241 — Fri, 04 May 2012 03:34:55 -0500

Hella again, i tried to insert some escape codes in the description text within the source.xml to make it multi lines but with no success. Do i have to work this out in AS 3.0 in flash ?

Re: Start in fullscreen mode

alexpopovici — Fri, 04 May 2012 02:57:23 -0500

Even in in JavaScript this is not possible.

Re: Start in fullscreen mode

user1216241 — Wed, 02 May 2012 02:53:46 -0500

even in javascript rather than flash ?

Re: Text field wont change

alexpopovici — Wed, 02 May 2012 02:26:00 -0500

Hello,
Please provide me a link to your slideshow so that I can take a closer look. Also please make sure you've cleared the cookies and cache of your browser after you replaced the new version. Let me know if you're still encountering any issue or everything is working fine on your side too.

Sincerely,
Alex

Re: Start in fullscreen mode

alexpopovici — Wed, 02 May 2012 02:14:42 -0500

Hello,
You can't make your slideshow start directly in fullscreen mode without any user interaction, also you can only set the width and height so that your slideshow will fit your entire webpage like in fullscreen mode.

Sincerely,
Alex

Start in fullscreen mode

user1216241 — Mon, 30 Apr 2012 00:52:33 -0500

Hello, i'd like to know if there is a way to make the slideshow start in fullscreen mode without any user interaction ?

Re: Text field wont change

user892961 — Tue, 24 Apr 2012 09:35:35 -0500

Any update on this? I downloaded it from your free page, but the closeButtonLabel still wont change. I'd like this to be fixed, please advise, thanks.

Re: How to embed Slideshowbox into Wordpress

alexpopovici — Mon, 23 Apr 2012 07:15:42 -0500

Hello,
You have to initialize the .html file from your Javascript SimpleFade folder (which is uploaded on your server via FTP) through this iframe code:

( replace SimpleFade/sample.html with the correct path, where the .html was uploaded on your server, also the width and height are customizable as you preffer )

Let me know if everything works on your side too.

Regards,
Alex

New update to SlideShowBox 2.0

kneo — Fri, 20 Apr 2012 03:17:34 -0500

We have just made a silent update to the SlideshowBox package. This update consists of bugfixes and changes to the behavior of JavaScript templates on mobile devices.

Bugfixes
- fixed a problem of the audio player not working properly when the JavaScript templates were displayer in Internet Explorer 9 (the audio player wouldn't stop when clicking on it)
- fixed a problem for the ModernSlide and ThumbnailSlide JavaScript templates that did not set the label for the Close button

JavaScript template updates
- the JavaScript templates of SlideshowBox have been updated to use jQuery 1.7.1
- the JavaScript templates now react to touch actions when displayed on mobile devices: the templates use the swipe left/right actions to display the previous/next images instead of clicking on the images; if the controls are set to automatically hide, they can be displayed again by a simple tap on the slideshow.

FrameSlide
- image navigation is done by using the swipe left/right actions
- tap on thumbnails displays the associated image (the image thumbnail is no longer displayed)
- tap on next image(s) selects and displays the image
- tap outside of the images displays the controls and image information (when autoHideControls = true) and automatically hide after the time specified by the controlsHideSpeed parameter

GridScale
- in the thumbnails view navigating through the thumbnails is done using swipe up/down actions, when the top or bottom control bars are also displayed
- in the thumbnails view the top/bottom control bars automatically hide after the time specified by the controlsHideSpeed parameter
- in the large image view the bottom control bar with the full screen button has been removed and the full screen button has been placed inside the center control bar (this update has also been implemented in the Flash version of the template)
- navigating within the large image mode is done by using the swipe left/right actions
- in the large image mode, when autoHideControls is set to true, the center control bar is displayed with a tap on the slideshow

ModernSlide
- image navigation is done by using the swipe left/right actions
- tap outside of the images displays the controls and image information (when autoHideControls = true) and automatically hide after the time specified by the controlsHideSpeed parameter

PanAndZoom
- image navigation is done by using the swipe left/right actions
- tap outside of the images displays the controls and image information (when autoHideControls = true) and automatically hide after the time specified by the controlsHideSpeed parameter

SimpleFade
- image navigation is done by using the swipe left/right actions
- tap outside of the images displays the controls and image information (when autoHideControls = true) and automatically hide after the time specified by the controlsHideSpeed parameter

SimpleFadeThumbview
- image navigation is done by using the swipe left/right actions
- tap outside of the images displays the controls and image information (when autoHideControls = true) and automatically hide after the time specified by the controlsHideSpeed parameter

SimpleGrid
- image navigation is done by using the swipe left/right actions
- thumbnail navigation is done by using the swipe left/right actions
- tap outside of the large image and the control bar closes the large image
- tap outside of the images displays the controls and image information (when autoHideControls = true) and automatically hide after the time specified by the controlsHideSpeed parameter

SimpleScale
- image navigation is done by using the swipe left/right actions
- tap outside of the images displays the controls and image information (when autoHideControls = true) and automatically hide after the time specified by the controlsHideSpeed parameter

SimpleSlide
- image navigation is done by using the swipe left/right actions
- tap outside of the images displays the controls and image information (when autoHideControls = true) and automatically hide after the time specified by the controlsHideSpeed parameter

SimpleThumbview
- image navigation is done by using the swipe left/right actions
- tap outside of the images displays the controls and image information (when autoHideControls = true) and automatically hide after the time specified by the controlsHideSpeed parameter

ThumbnailSlide
- image and thumbnail page navigation is done by using the swipe left/right actions

TwoStepFade
- image navigation is done by using the swipe left/right actions
- tap outside of the images displays the controls and image information (when autoHideControls = true) and automatically hide after the time specified by the controlsHideSpeed parameter

Re: Text field wont change

user892961 — Wed, 18 Apr 2012 11:00:18 -0500

So I downloaded from the "free" page, unzipped, and replaced my current version of SimpleThumbview.js with the one in this new download, closeButtonLabel still wont change.

Re: Text field wont change

user892961 — Wed, 18 Apr 2012 10:51:23 -0500

Ok, great. So you mean go to here [www.slideshowbox.com] and download the free version? then I'll just use my domain key code?

Re: Question about Audio

kneo — Wed, 18 Apr 2012 10:15:55 -0500

Yes, the package was updated. Just re-download it and replace the old files with the new ones and everything should be ok.

Re: Can't seem to get this working...

kneo — Wed, 18 Apr 2012 10:05:02 -0500

You are very welcome and I'm glad to hear that everything is working fine now.

Re: Not working in production site

kneo — Wed, 18 Apr 2012 10:04:34 -0500

I'm glad to hear that you solved the problem.
Usually the picasa feeds are not working when the url is using a secured protocol, https.
If you will change the secured protocol https, with a normal protocol http, everything should work ok.

Re: Is there anyway I can use a version with as2?

kneo — Wed, 18 Apr 2012 09:59:01 -0500

Unfortunately no. SlideShowBox works only with action script 3.0

Re: Text field wont change

kneo — Wed, 18 Apr 2012 09:57:56 -0500

We fixed the problem and once you will download the last package and replace the old files with the new ones, everything should be ok.

Re: Can't get Auto Detect working in multiple browers

kneo — Wed, 18 Apr 2012 09:55:53 -0500

The problem is that you didn't set the path for the js and swf file correctly.
See this [screencast.com]
Now the gallery is trying to load the files from here:
[photos.atenndesign.com]
and
[photos.atenndesign.com];
but as you can see the two files are not there.
You can either the two files there or you can set the correct path if the files are somewhere else on your server.

Can't get Auto Detect working in multiple browers

user1197251 — Mon, 16 Apr 2012 17:57:13 -0500

I want to use the Auto-detect version of the SimpleFadeThumbview slideshow. I have set up a blank test page here with all 4 versions:
[photos.atenndesign.com]

Auto-detect only works in Safari/Apple devices, while Javascript is the only one that works on a PC in Chrome, Firefox, and IE. I have both Flash and Javascript enabled/updated on my PC, so if I understand correctly, all should work on the PC, while only Auto-detect and JS should work on Apple devices, correct?

I would like to use Auto-detect only so it will work across the board - what is the problem?

Re: Text field wont change

user892961 — Fri, 13 Apr 2012 16:17:14 -0500

Any update on this?

Is there anyway I can use a version with as2?

user1219536 — Fri, 13 Apr 2012 16:02:18 -0500

Action Script 2.0?

Re: Not working in production site

user1219536 — Fri, 13 Apr 2012 15:56:25 -0500

Just solved it. Had to use Photobucket instead of Picasa.

Picasa only works when exporting the movie (Control + Enter inside flash).

I don't know what's going on, perhaps Picasa is using Atom instead of RSS 2.0.

Re: Can't seem to get this working...

user1210451 — Fri, 13 Apr 2012 15:26:54 -0500

OH IT WORKS!!!!

YAAAAAY!!!!

Thank you SO MUCH!!!!

Man...I *KNEW* it was going to be something basic.

THANKS AGAIN!!

Not working in production site

user1219536 — Fri, 13 Apr 2012 14:55:41 -0500

I can't make it work in:

Production site
Localhost
Local folder

It works only:

When I export the movie and preview inside flash.

Don't know what's going on. I'm using the Picasa Feed.

You can see it here: [karismanoivas.com.br]